|
|
|
Laboratory Facilities
: CONTROL SYSTEM LABORATORY :
This Laboratory has the following
equipments/sets/ instruments to provide necessary basis for
experimentations in control system studies for UG students:
- UNESCO Equipments: some
important ones are as follows:
- D.C.Servo system type
ES150&ES130
- Synchro-pair
Transmitter-receiver sets
- Potentiometer error Detector
set
- Linear System Simulator set
- Relay control system set
- Assembled PCs for contol
system experimental studies.
- Solar Photo Voltaic Panels for
solar energy based contol system studies
- Philips Oscilloscope,15 MHz
- Few Digital
multimeters,Function Generators,&Electrical Power supplies,etc.
POWER ELECTRONICS LABORATORY :
This Laboratory used presently by
UG students consists of:
- semiconductor
Devices:UJT,SCR,Triac,Diacs,etc
- Experimental
Modules:Converters,Inverters,Choppers,Cycloconverters,Dual
converters,etc
- A host of dicrete components
for designing hardware set ups
- Conventional &Advanced
Equipments: Storage CRO,IC Tester,Function Generators, Microprocessor
kits,
- Pentium III computers, etc
- Software
Packages:PSPICE,ISPICE,MATLAB,etc
- Upgradation in progress
COMPUTER SIMULATION
LABORATORY :
This Laboratory provides a
central facility to students,faculty and staff of the department with
the following features
- Several state of art PC
- Several dot matrix printers
- LAN-all the computers are on
the local area network
- A Linux based file and print
Server
- Simulation experiment coded in
FORTRAN-77,C,C++
- MATLAB Demo version
- Under Extensive renovation (at
present)
ELECTRICAL MEASUREMENT LABORATORY :
This laboratory is equipped with
various trainers, recorders &other calibrating& testing equipments. Few
of them are as follows:
- Lcr bridge
- Process control simulator
- Process trainer
- Temperature measurement
trainer
- PC based Multi process control
and instrumentation trainer
- Microprocessor trainer kits
- Educational microprocessor
based PLC trainer
- Dual trace oscilloscope
- Storage type oscilloscope
- Digital IC tester
PROJECT LABORATORY :
This Laboratory provides the
necessary components and devices for the fabrication of the hardware
projects of both UG and PG students. Following are the list of important
components available in the project Laboratory:
- Bread boards: Different
specifications.
- IC 's : Analog IC's, Digital
IC's, Microprocessor IC's, IC bases and sockets.
- Semiconductor Components:
Transistors, Diodes, Zener diodes, SCR's, Tunnel diodes, Op- Amps,
Phototransistors etc.
- Digital Components: Counters,
Schimmitt triggers, Decoders, Digital clock etc.
- Display devices: LED's, LCD's,
Nixie Tube, Seven segmental devices etc.
- Switching Devices : Toggle,
bend and rotory switches, relays etc.
- Capacitors: Different ratings
of paper, polyester, Electrolytic Capacitors.
- Resistors: Different ratings
of Carbon, Wire wound resistors, presets, pots., etc.
- Transformers: Different
ratings of Transformers and cores.
- Supporting Instruments:
Different ratings of soldering iron, handrill, hacksaw, pliers,
Tweezers, Testers, Sandpaper, Rolls of enameled wires, copper Wires and
flexible wires etc.
ELECTRICAL MACHINES
LABORATORY :
The laboratory caters to the
needs of Electrical Engineering, Electronics Engineering, mechanical and
Production Engineering students. It has many facilities.
- A large motor generator set to
supply d.c. power.
- Alternator-D.C.motor set 2 no.
- Synchornous motor -d.c.
generator sets 5 no.
- D.C. series motor.
- 3-Phase Induction motors(both
slip ring and cage type).
- Single phase Induction motors.
- Transformers.
- Various starters for d.c. and
a.c. motors.
- Various loading arrangements
for d.c. and a.c. motors.
TESTING AND CALIBERATION FACILITIES :
The department has the facility
for testing and caliberation of the following Instruments/Equipments.
- Voltmeters
- Ammeters.
- Wattmeters.
- Energymeters(Single Phase).
- Insulation Testing of cable.
|
