Publications

A. International Journals:

1.  Synthesis and Characterization of Nanofiltration Carbon Membrane Derived from Phenol-formaldehyde resin, Carbon 41 (2003) 2961-2972.

2.  Separation of Cr (VI) Using Modified Ultrafiltration Charged Carbon Membranes and its Mathematical Modeling, Journal of Membrane Science 254 (2005) 229-239.

3. Hydrolysis of Olive Oil in Biphasic Enzyme Membrane Reactor and its Mathematical Modeling with Enzyme Chemically Bonded to Modify Carbon Membrane, AICHE Journal 52(4) (2006)1611-1620.

4. M. Siraj Alam, L. Prasad, S.C Gupta, and V.K. Agarwal, “Enhanced Boiling of Saturated Water on Copper Coated Surfaces”, Chem. Eng. Process. Vol. 47, Issue 1, pp 159-167, 2008.

5. L. Prasad, M. Siraj Alam, S.C Gupta, and V.K. Agarwal, “Enhanced Boiling of Methanol on Copper Coated Surface”, Chemical Engineering and Technology, Vol. 30, No. 7, pp 901-906, 2007.

6. S. Bandyopadhyay, M. Siraj Alam, V.K. Agarwal, and Kailas L. Wasewar, “Computer Aided Design (CAD) of Multicomponent Condenser” Chem. Biochem. Eng. Q. 21 (2) 97–103 (2007).

7. M. Anil, M. Siraj Alam, V. K. Agarwal, and, Kailas Wasewar, “CFD Modeling of Three-Phase Bubble Column: 1. Study of Flow Pattern”, Chem. Biochem. Eng. Q. 21 (3) 197–205 (2007).

8. M. Siraj Alam, and V.K. Agarwal, “Pool Boiling of Liquids & their Mixtures on Enhanced Surfaces at Sub-atmospheric Pressures” Chem. Engg. Transactions, Vol. 17, pp 1503-1508, 2009.

9. M. Siraj Alam, S.C Gupta, and V.K. Agarwal, “Nucleate Pool Boiling of Binary Mixtures at Sub-Atmospheric Pressures”, communicated in Int. J., Chemical Technology. (Communicated, Under revision)

 

 B. International Conferences:                    

10. Synthesis and Characterization of Nanofiltration Carbon Membrane, Indian Chemical Engineering Congress (CHEMCON-2003), 19-22 December 2003, Regional research Laboratory (CSIR), Bhubaneswar, Orissa, India.

11. Separation Properties of Nitrated and Aminated Carbon Membrane Derived from Phenol-formaldehyde Resin for Chromium(VI) Recovery, EUROMEMBRANE – 2004, Humbarg, Germany, September 28 – October 1, 2004.

12. Hydrolysis of Olive Oil in Biphasic Enzyme Membrane Reactor Using Modified Carbon Membrane, CHEMCON 2004, Mumbai.

13. M. Siraj Alam, and V.K. Agarwal, “Pool Boiling of Liquids & their Mixtures on Enhanced Surfaces at Sub-atmospheric Pressures” presented in ICheaP-9, the ninth International Conference on Chemical & Process Engineering, held at Rome, Italy, on 10-13 May 2009.

 

C. National Journal

 

14. V. K. Agarwal, Mohammad Siraj Alam, and S. C. Gupta, ‘Mathematical Model for Existing Multiple Effect Evaporator Systems’, CEW, pp 76-78, May 2004.

 

D. National Conferences:                          

15. Method of Producing Syngas from Gasification of Bagasse, Saurabh Umrao, Pankaj Kumar and Sadhana Sachan Advances in Chemical Engineering, February 27-28, 2009, Department of Chemical Engineering, Thapar University, Patiala- Punjab, India.

16. Pervaporation of Organic-Organic mixtures by polymeric membranes, Ritu Arya and Sadhana Sachan, Enabling Technologies for Chemical process industries, Indian Institute of Chemical Engineers, Kanpur Regional Centre at CSJM university Kanpur.

17. Polymer layered silicate nano composites (PLSN): High performance polymeric material, Umesh Chandra Sharma, Shashir Sinha and Sadhana Sachan, TACEE-2012, March 23-24, 2012 at Pilani, India.

18. Study of thermal characterization of Xyloglucan (Polysaccharide) and its copolymer, Praveen Bhai Patel, SadhanaSachan, TACEE-2012, March 23-24, 2012 at Pilani, India.

19. Abhishek K. Chandra, Kaushal Kishor, P. K. Mishra, and M. Siraj Alam, A review on liquid-liquid mass transfer in microchannel system, Proceedings of conference, Technological Advancements in Chemical and Environmental Engineering (TACEE), held at BITS – Pilani, on March 23 – 24, 2012, pp 159. 

20. Kaushal Kishor, Abhishek K. Chandra, P. K. Mishra and M. Siraj Alam, Mass Transfer in the Two-Phase Microfluidic Devices, RACEE-2012, National Conference on Recent Advances in Chemical and Environmental Engineering, January 20-21, 2012, pp 178, Chemical Engg. Department, NIT Rourkela-769 008, Orissa, India.

21. R. Pandey, S. Khare, and M. Siraj Alam, “Efficiency Enhancement of ATR” presented in Advances in Chemical Engineering (AChemE 2009), held at Thapar University Patiala, Punjab on Feb 27-28, 2009.

22. S. Mishra, S. Gupta, and M. Siraj Alam, “Optimization of the Cooling Tower System and Efficiency Enhancement” presented in Advances in Chemical Engineering (AChemE 2009), held at Thapar University Patiala, Punjab on Feb 27-28, 2009.

23. N. Chauhan, R. Gautam, and M. Siraj Alam, “Integration of Vapor Dow System in Polyester Plants” presented in Advances in Chemical Engineering (AChemE 2009), held at Thapar University Patiala, Punjab on Feb 27-28, 2009.

24. M. Siraj Alam, V.K. Agarwal, and Kailas L. Wasewar, “Computer Aided Design of Multi-component Condenser” presented in CHEMCON-2006, held at Ankleshwar, Gujrat on Dec 27-30, 2006.

25. L. Prasad, M. S. Alam,  S.C Gupta, and V.K. Agarwal, ‘Enhanced Boiling of Saturated Water on Copper Coated Heating Tubes’, Proceedings on Energy Management in Process Industries (EMPI), The Institution of Engineers (India), Aligarh Local Center, pp-II-79-86, Feb (2006).

26. Ritu Arya, “Land Use Land Cover change Analysis of Allahabad City Using Remote Sensing             Data”, published on national conference proceedings “Fertilizer Technology: 21st Century Challenges and Options” held on March 07-09, 2008.

27. Ritu Arya, SadhanaSachan, “Pervaporation of Organic-Organic Mixture by Polymeric Membranes” published on national conference proceedings “Enabling Technologies for Chemical Process Industries” held on November 13-14 2009.

 


Last Updated (Wednesday, 09 May 2012 16:57)