Dr. Pragya Shandilya


Dr. Pragya Shandilya

Assistant Professor
Department of Mechanical Engineering
Motilal Nehru National Institute of Technology Allahabad, Prayagraj, India-211004
E-mail: pragya20[at]mnnit[dot]ac[dot]in
Telephone: +919758471224(O)

Research Publications


Book Chapter:

Saikiran D, Rouniyar A K, Shandilya P (2020). Process Parameters Optimization for Inconel-825 in WEDM Using TLBO Algorithm, Chapter 39 Reliability and Risk Assessment in Engineering, Lecture Notes in Mechanical Engineering, pp. 485-495. Springer, Singapore. https://doi.org/10.1007/978-981-15-3746-2_39
Rouniyar A K, Shandilya P (2019). Study on Powder Mixed Electrical Discharge Machining Process: A Review. Chapter 10 in DAAAM International Scientific Book 2019, 123-142, B. Katalinic (Ed.), Published by DAAAM International, ISBN 978-3-902734-05-1, ISSN 1726-9687, Vienna, Austria DOI: 10.2507/daaam.scibook.2019.10
Rouniyar A K, Shandilya P, (2019) Analysis and optimization of tool wear rate in magnetic field assisted powder mixed electrical discharge machining of Al6061 alloy using TLBO, Chapter 45 in Lecture Notes on Multidisciplinary Industrial Engineering, Advances in Computational Methods in Manufacturing 2019, Published by Springer Singapore, ISBN 978-981-329-072-3, ISSN 2522-5022, DOI: 10.1007/978-981-32-9072-3.
Bisaria H, Shandilya P, (2018) Wire electric discharge machining of shape memory alloys, Spark Erosion Machining, MEMS to Aerospace, Science Publishers an Imprint of CRC Press/ Taylor & Francis Group - book chapter accepted.
Bisaria H, Shandilya P (2015) Machining of metal matrix composites by EDM and its variants, Chapter 23 in DAAAM International Scientific Book 2015, pp. 267-282, B. Katalinic (Ed.), Published by DAAAM International, ISBN 978-3-902734-05-1, ISSN 1726-9687, Vienna, Austria DOI: 10.2507/daam.scibook.2015.23.
Shandilya P, Jain P K, Jain N K (2011) Wire electric discharge machining of metal matrix composites, Chapter 30 in DAAAM International Scientific Book 2011, pp. 383-400, B. Katalinic (Ed.), Published by DAAAM International, ISBN 978-3-901509-84-1, ISSN 1726-9687, Vienna, Austria DOI: 10.2507/daam.scibook.2011.30.

Journals:

Rouniyar A K, Shandilya P, Effect of Machining Parameters on Surface Roughness and White Layer during Magnetic Field Assisted Powder Mixed EDM of AA6061. International Journal of Materials and Product Technology, Published by Inderscience, 2021 (Accepted)
Rouniyar A K, Shandilya P, Study of Surface Crack Density and Microhardness of Aluminium 6061 Alloy Machined by EDM with Mixed Powder and Assisted Magnetic Field. Journal of Micromanufacturing, doi.org/10.1177/25165984211016445, Published by SAGE, 2021.
Rouniyar A K, Shandilya P, Semi-Empirical Modeling and Optimization of Process Parameters on Overcut during MFAPM-EDM of Al6061 Alloy. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, doi.org/10.1177/09544089211015890, Published by SAGE, 2021.
Rouniyar A K, Shandilya P, Experimental Investigation on Recast Layer and Surface Roughness on Aluminum 6061 Alloy During Magnetic Field Assisted Powder Mixed Electrical Discharge Machining, Journal of Materials Engineering and Performance. Vol. 29, pp. 7981–7992, doi.org/10.1007/s11665-020-05244-4, Published by Springer, 2020.
Rouniyar A K, Shandilya P, Optimization of process parameters in magnetic field assisted powder mixed EDM of aluminium 6061 alloy, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, doi: 0954406220959108, Published by SAGE, 2020.
Bisaria H, Shandilya P, Surface integrity aspects for NiTi shape memory alloys during wire electric discharge machining: A review, Journal of Materials Research, Vol. 35, Issue 6, pp. 537-558, Published by Springer, 2020.
Bisaria H, Shandilya P, Wire Electric Discharge Machining Induced Surface Integrity for Ni55.95Ti44.05 Shape Memory Alloy, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, https://doi.org/10.1177/0954408920951146, Published by SAGE, 2020.
Shandilya P, Rouniyar A K, Saikiran D, Multi-Objective Parametric Optimization on Machining of Inconel-825 using Wire Electrical Discharge Machining, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 234, Issue 20, pp. 4056-4068, Published by SAGE, 2020.
Bisaria H, Shandilya P, Study on crater depth during material removal in WEDC of Ni-rich nickel-titanium shape memory alloy, Journal of the Brazilian Society of Mechanical Sciences and Engineering, DOI: 10.1007/s40430-019-1655-5, Published by Springer, 2019.
Bisaria H, Shandilya P, Processing of curved profiles on Ni-rich Nickel-Titanium shape memory alloy by WEDM, Material and Manufacturing Processes, Vol. 34, Issue 12, pp. 1333-1341, Published by Taylor and Francis, 2019.
Bisaria H, Shandilya P, Experimental investigation on wire electric discharge machining (WEDM) of Nimonic C-263 superalloy, Material and Manufacturing Processes, Vol. 34, Issue 1, pp. 83-92, Published by Taylor and Francis, 2019.
Rouniyar A K, Shandilya P, Fabrication and experimental investigation of magnetic field assisted powder mixed EDM on machining of Aluminum 6061 Alloy, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 233, Issue 12, pp. 2283-2291, Published by SAGE, 2019.
Rouniyar A K, Shandilya P, Experimental study on material removal rate of Al6061 machined with magnetic field assisted powder mixed electrical discharge machining, IOP Conference Series: Journal of Physics, Vol. 1240, pp. 1-6, Published by IOP Publishing, 2019.
Rouniyar A K, Shandilya P, Improvement in machined surface with the use of powder and magnetic field assisted on machining aluminium 6061 alloy with EDM, IOP Conference Series: Materials Science and Engineering, Vol. 647, pp. 1-6, Published by IOP Publishing, 2019.
Bisaria H, Shandilya P, The machining characteristics and surface integrity of Ni-rich NiTi shape memory alloy using wire electric discharge machining, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, DOI: 10.1177/0954406218763447, Published by SAGE, 2018.
Shandilya P, Bisaria H, Jain P K, Parametric Study on recast layer during electric discharge wire cutting (EDWC) of Ni-rich NiTi shape memory alloy. Journal of Micromanufacturing, Vol. 1, Issue 2, pp. 134-141, DOI: 10.1177/2516598418766934, Published by SAGE, 2018.
Bisaria H, Shandilya P, Experimental studies on electrical discharge wire cutting performance of Ni-rich NiTi shape memory alloy, Material and Manufacturing Processes, Vol. 33, Issue 9, pp. 977-985, Published by Taylor and Francis, 2017.
Bisaria H, Shandilya P, Experimental study on response parameters of Ni-rich NiTi shape memory alloy during wire electric discharge machining, IOP Conference Series: Materials Science and Engineering, Vol. 330, pp. 1-6, Published by IOP Publishing, 2018.
Bisaria H, Shandilya P, Study on Effect of machining parameters on performance characteristics of Ni-rich NiTi shape memory alloy during wire electric discharge machining, Materials Today: Proceedings, Vol. 5, Issue 2, pp. 3316-3324, Published by Elsevier, 2018.
Rouniyar A K, Shandilya P, Multi-Objective optimization using Taguchi and grey relational analysis on machining of Ti-6Al-4V alloy by powder mixed EDM process, Materials Today: Proceedings, Vol. 5, Issue 11, pp. 23779-23789, Published by Elsevier, 2018
Shandilya P, Jain PK, Jain NK, Modeling and process optimization for wire electric discharge machining of metal matrix composites, International Journal of Machining and Machinability of Materials, Vol. 18, Published by Inderscience, 2016.
Bisaria H, Gupta MK, Shandilya P, Srivastava RK, Effect of fiber length on mechanical properties of randomly oriented short jute fibre reinforced epoxy composite, Materials Today: Proceedings, Vol. 2, pp. 1193-1199, Published by Elsevier, 2015
Shandilya P, Tiwari A, Artificial Neural Network Modelling and Optimization using Genetic Algorithm of Machining Process, Journal of Automation and Control Engineering, Vol. 2, Issue 4, pp. 348-352, 2014.
Shandilya P, Jain PK, Jain NK, Prediction of Surface Roughness During Wire Electrical Discharge Machining of SiCp/6061 Al MMC, International Journal of Industrial and Systems Engineering, Vol. 12, Issue 3, pp. 301-315, Published by Inderscience, 2012.
Shandilya P, Jain PK, Jain NK, Neural network based modeling in wire electric discharge machining of SiCp/6061 Aluminum metal matrix composite, Advanced Materials Research, Vol. 383-390, pp. 6679-6683, Published by Trans Tech Publication, 2012.
Shandilya P, Jain PK, Jain NK, On Wire Breakage and Microstructure in WEDC of SiCp/6061 Aluminum Metal Matrix Composites, International Journal of Advanced Manufacturing Technology, Vol. 61, Issue 9–12, pp. 1199-1207, Published by Springer, 2012.
Shandilya P, Jain PK, Jain NK, Parametric optimization during wire electric discharge machining of SiCp/6061 Al metal matrix composite using response surface methodology, Procedia Engineering, Vol. 38, pp. 2371-2377, Published by Elsevier, 2012.
Shandilya P, Jain PK, Jain NK, Study on wire electric discharge machining Based on response surface methodology and genetic algorithm, Advanced Material Research, Vol. 622-623, pp. 1280-1284, Published by Trans Tech Publication, 2013.
Shandilya P, Jain PK, Jain NK, RSM and ANN modelling approaches for predicting average cutting speed during WEDM of SiCp/6061 Al MMC, Procedia Engineering, Vol. 64, pp. 767-774, Published by Elsevier, 2013.
Shandilya P, Jain NK, Jain PK, Experimental studies on WEDC of SiCp/6061 Al metal matrix composite, Key Engineering Materials, Vol. 450, pp. 173-176, Published by Trans Tech Publication, 2011.
Shandilya P, Jain PK, Jain NK, Modeling and analysis of surface roughness in WEDC of SiCp/6061 Al MMC through response surface methodology, International Journal of Engineering Science and Technology, Vol. 3, Issue 1, 531-535, 2011.

Conference Proceedings:

Rouniyar A K, Shandilya P, Improvement in machined surface with the use of powder and magnetic field assisted on machining aluminium 6061 alloy with EDM,20. 4th International Conference on Advanced Materials Research and Manufacturing Technologies (AMRMT), St Anne’s College, Oxford, UK, 8-11 August, 2019.
Rouniyar A K, Shandilya P, Study of Surface Crack Density of Aluminium 6061 Alloy Machined by EDM with Mixed Powder and Assisted Magnetic Field. International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 2019), 12-14 Dec, 2019, Indore, India
Bisaria H, Shandilya P, Experimental investigation on micro-hardness of Ni-rich NiTi shape memory alloy in wire electric discharge machining, AIMTDR-2018, 13-15 December 2018, Chennai, India.
Saikiran D, Rouniyar AK, Shandilya P, Process parameters optimization for Inconel-825 in WEDM using TLBO algorithm, 1st International and 4th National Conference on Reliability and Safety Engineering (INCRS-2018), 26-28 February 2018, Jabalpur, India.
Bisaria H, Shandilya P, Electrical discharge wire cutting performance of Ni55.95Ti44.05 shape memory alloy, COPEN-10, 7-9 December 2017, Chennai, India.
Gupta R, Bisaria H, Shandilya P, Effect of machining parameters on cutting rate of Incoloy 825 in wire electrical discharge machining, National Conference on Recent Advances in Mechanical Engineering (NCRAME-2017), 02-03 June, 2017, Kurukshetra, India.
Bisaria H, Shandilya P, Experimental study on performance characteristics of Ni-rich NiTi shape memory alloy in wire electric discharge machining, European Advanced Materials Congress (EAMC), 22-24 August 2017, Sweden, Stockholm.
Bisaria H, Shandilya P, Study on advancement in machining of shape memory alloys: A Mini Review, International Conference on Advances in Functional Materials, 8-11 August 2016, Jeju Island, South Korea.
Kumar U, Shandilya P, Modeling and analysis of surface roughness during dry turning, AIMTDR-2016, 16-18 December 2016, Pune, India.
Bisaria H, Shandilya P, Micro-modeling and analysis of wire wear rate in wire electric discharge machining, IVth International Conference on Production & Industrial Engineering-2016, 19-21 December 2016, Jalandhar, India
Singh D, Shandilya P, Modeling and analysis of wire wear rate in WEDM, National Conference on Mechanical Engineering Ideas, Innovations and Initiatives, 16-17 April 2016, Aligarh, India.
Kumar A, Shandilya P, Optimization of process parameters of advanced manufacturing process using TLBO approach, International Conference on Precision, Meso, Micro, and Nano Engineering-2015, 10-12 December 2015, Bombay, India.
Shandilya P, Effect of reinforcement on kerf during machining of metal matrix composite, 7th National Symposium for Materials MR-15, 21-22 May 2015, Bombay, India.
Shandilya P, Tiwari A, Artificial Neural Network Modelling and Optimization using Genetic Algorithm of Machining Process, 6th International Conference on Computer and Automation Engineering, 2-3 January 2014, Melbourne, Australia.
Shandilya P, Neural Network Based Modeling for Average Cutting Speed in Wire-Electric Discharge Machining of SiCp/6061 Al MMC, International Conference on Advanced Computational Technologies and Creative Media (ICACTCM’2014), 14-15 August 2014, Pattaya, Thailand.
Mishra AK, Shandilya P, FEM Analysis on Residual Stresses induced in dry Turning: A Review, 5th International and 26th All India Manufacturing Technology Design and Research Conference - 2014, 12-14 December 2014, Guwahati, India.
Shandilya P, Jain PK, Misra JP, National conference on recent trends in design manufacturing and thermal sciences, 22-23 March 2012, Ghaziabad, India.
Shandilya P, Jain PK, Jain NK, RSM and ANN modelling approaches for predicting average cutting speed during WEDM of SiCp/6061 Al MMC, International Conference on Design and Manufacturing (InConDM-2013), 18-20 July 2013, Chennai, India.
Shandilya P, Jain PK, Genetic Algorithm based optimization during wire electric discharge machining of metal matrix composite, Annals of DAAAM for 2012 & Proceeding of the 23rd International DAAAM Symposium, Vol. 23, No. 1, ISSN 2304-1382, pp 401-404.
Shandilya P, Jain PK, Jain NK, A comparative study of ANN and RSM models for predicting process parameters during WEDC of SiCp/6061 Al MMC, Proceeding of 37th International MATADOR Conference 2012, Manchester, UK
Shandilya P, Jain PK, Jain NK, Study on wire electric discharge machining Based on response surface methodology and genetic algorithm, 3rd International Conference on Manufacturing Science and Technology, 18-19 August 2012, New Delhi, India.
Shandilya P, Jain PK, Jain NK, Parametric optimization during wire electric discharge machining of SiCp/6061 Al metal matrix composite using response surface methodology, International conference on modeling, optimization and computing, 10-11 April 2012, Tamilnadu, India.
Shandilya P, Jain PK, Jain NK, Artificial neural network kerf model in Wire Electric Discharge Machining of SiCp/6061 Al MMC, 4th International and 25th All India Manufacturing Technology Design and Research Conference-2012, 14-16 December 2012, Kolkata, India.
Shandilya P, Jain PK, Jain NK, Effect of machining parameters on MRR during wire electric discharge cutting of SiCp/6061 Al MMC, Annals of DAAAM for 2011 & Proceedings of the 21st International DAAAM Symposium.
Shandilya P, Jain PK, Jain NK, Neural network based modeling in wire electric discharge machining of SiCp/6061 Aluminum metal matrix composite, International Conference on Manufacturing Science and Technology, 16-18 September 2011, Singapore.
Shandilya P, Jain PK, Jain NK, Surface Integrity Aspects After Wire Electric Discharge Machining of SiCp/6061 Al Metal Matrix Composites, International Conference on Advanced Materials and Manufacturing Processes, 6-8 December 2011, Kharagpur, India.
Shandilya P, Jain PK, Jain NK, Selection of optimum parameters in wire electric discharge cutting (WEDC) of SiCp/6061 Al MMC, 5th International Conference on Advances in Mechanical Engineering, 6-8 June 2011, Surat, India.
Shandilya P, Jain PK, Jain NK, Study on average cutting speed in WEDM of SiCp/6061 Al MMC based on RSM, 4th International Conference on Advances in Mechanical Engineering, 23-25 September 2010, Surat, India.
Shandilya P, Jain NK, Jain PK, Experimental studies on WEDC of SiCp/6061 Al metal matrix composite, 3rd International Conference on Advance Design and Manufacturing, 8-10 September 2010, United Kingdom.
Shandilya P, Jain PK, Misra JP, Experimental investigation during WEDC of SiCP/6061Al MMC, Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium, 2010, Vol. 21, No 1, 1091-1092.
Shandilya P, Jain PK, Jain NK, On Wire Breakage and Microstructure in WEDC of SiCp/6061 Aluminum Metal Matrix Composites, 3rd International and 24th All India Manufacturing Technology Design and Research Conference-2010, 13-15 December 2010, Visakhapatnam, India.
Shandilya P, Misra A, Nanotechnology: Fundamentals and approaches, National conference on state of art technologies in mechanical engineering, October 2007, Pantnagar, India.
Shandilya P, Gope PC, Fatigue crack growth prediction under variable amplitude loading, National conference on state of art technologies in mechanical engineering, October 2007, Pantnagar, India.