Dr. Pragya Shandilya
Assistant Professor
Department of Mechanical Engineering
Motilal Nehru National Institute of Technology Allahabad, Prayagraj, India-211004
E-mail: pragya20[at]mnnit[dot]ac[dot]in
Telephone: +919758471224(O)
Thesis Supervised
| S.No | Research Topic | Name of Student | Completion/Registration Year | Ph.D. Completed: |
|---|---|---|---|
| 1 | Study on Performance Characteristics of Ni-rich NiTi Shape Memory Alloy during Wire Electric Discharge machining | Himanshu Bisaria | 2019 | Ph.D. Ongoing |
| 1 | Study on Performance Characteristics of Aluminium 6061 Alloy during Magnetic Field Assisted Powder Mixed Electrical Discharge Machining | Arun Kumar Rouniyar | 2016 |
| 2 | In the area of Performance Studies of Surface Grinding Variants of Electro-Chemical Spark Machining Process | Nandani Singh | 2016 | M.Tech Students |
| 1 | Experimental Investigation on Hot Wire Cladding of Hastelloy | Kamal Kishor | 2020 |
| 2 | Study on Process Parameters During Microplasma Deposition Process of Hastelloy C276 | Sachin Shubham | 2020 |
| 3 | Analytical Modelling of Residual Stress in Additive Manufacturing | Shubham Vyas | 2020 |
| 4 | Parametric Study During Electric Discharge Coating on Mild Steel | Shubham Agrahari | 2019 |
| 5 | Powder Mixed Electric Discharge Machining on Nimonic-90 | Saurabh Sonker | 2019 |
| 6 | Multi response Optimization for Inconel-825 in WEDM using TLBO Algorithm | D. Saikaran | 2018 |
| 7 | Experimental Investigation During Wire Electric Discharge Machining of Nimonic C-263 Superalloy | Keshav Kumar Painkra | 2018 |
| 8 | Modelling And Analysis of Crater Formation During Electric Discharge Machining | Varun Pratap Sharma | 2017 |
| 9 | Study of Process Parameters in Metal Working Fluids with the Application of Biofuel | Devendra Meena | 2017 |
| 10 | Study of Surface Integrity Aspects of Inconel-825 due to trim cutting by Wire Electric Discharge Machining | Rajat Gupta | 2017 |
| 11 | Modeling and Analysis of Wire Wear Rare in WEDM | Deepak Singh | 2016 |
| 12 | Parametric Effect and Optimization of Hardness During dry turning Process | Rahul Sharma | 2016 |
| 13 | Modeling and Analysis of Surface Roughness During Dry Turning | Upendra Kumar | 2016 |
| 14 | A Teaching Learning Based Optimization Approach Applied to the Advance Machining Problems | Anil Kumar | 2015 |
| 15 | Manufacturing of Short Jute Fibre Reinforced Epoxy Composite: Mechanical and Wear Behaviour | Himanshu Bisaria | 2015 |
| 16 | Process Optimization and Estimation of Machining Performance using TLBO Techniques in WEDM | Abhishek Mishra | 2015 |
| 17 | EDM Process Performance Evaluation by Statistical Modeling and Optimization | Vipin Tripathi | 2014 |
| 18 | Thermal Modeling and Analysis of Carbide Tool Using Finite Element Method. | Yashvinder Khanna | 2014 |
| 19 | A Hybrid Intelligent Method for Modeling The EDM Process | Anubhav Rai | 2014 |
| 20 | Non-linear FEM Modeling and Simulation of Residual Stresses in Dry Turning Process | Alok Kumar Mishra | 2014 |